MACHINES STONE



Diamond wire saw

Diamond wire saw


Diamond wire saw is run by four-wheel drive with a length of diamond rope 17.5 m and is designed for formatting blocks of stone and cutting them into slabs with a length of 3500 mm and height 2000 mm.


Saw machines for 1800-3000 mm discs

Saw machines for 1800-3000 mm discs


Saw machines for 1800-3000 mm discs gate has a structure based on two pillars bearing and is intended to divide the blocks of stone slabs of a certain thickness and height.


One support saw 1000-1600 mm

One support saw 1000-1600 mm


One support saw for 1000-1600 mm discs is a machine with a bridge structure designed to cut low block for a specified dimension. Setting the width of the cutting is done by the passage of the machine on tracks mounted on stilts, and traffic is working with the disk drive truck saw the beam precisely machined guides.


One support saw 400-600/800

One support saw 400-600/800


One support saw bridge structure is designed for cutting slabs, and small blocks for a specific dimension of disks with a diameter of 400-600 (7.5 kW motor) .600-800 (11 kW engine option) or 400-600-800 ( 11 kW motor with inverter - optional).


Two support saw

Two support saw


Two support saw the bridge structure is designed for cutting stone slabs to the desired size by using two parallel cutting discs with a diameter of 400 to 600 mm.


Profile grinder with inclinable spindle

Profile grinder with inclinable spindle


Surface grinding polisher is designed for side grinding and polishing the sides of the stone slabs, exercise, grinding and polishing phases and a wide stage in straight lines with a thickness of 130 mm and a length of 2900 mm. Spindle thread M14 is completed which allows the use of a wide range of tools at hand sides in the treatment of a typical metal and rubber grip. Spring clamp. Electrically adjustable height of the spindle, manually adjustable angle from 0 to 90 degrees.


Profile grinder to a quarter of a cylindrical

Profile grinder to a quarter of a cylindrical


Single-spindle grinding polisher is designed for cutting and polishing one quarter of the shaft on the side of stones panel .Used electric spindle lean to 90 degrees and electric height adjustment with pneumatic clamp allows for milling, grinding and polishing the side of the flat phase and phase in a wide straight lines.


Profile grinder  for collars

Profile grinder for collars


Single-spindle grinding polisher is designed for cutting and polishing half rollers on the sides of stone slabs. The applied electric spindle lean to 180 degrees and electric height adjustment allows for milling, grinding and polishing the side of the flat, the lower and upper stages and the quarter-rollers in straight lines.


Automatic grinding and polishing machine

Automatic grinding and polishing machine


The machine is built as one head with hydraulic clamp and is used for grinding and polishing stone slabs. Standard machining box is 3000x2800 mm. Drive spindle head 4 or 5 segment using an electric motor with a power of 11 kW and the heads of more segments of a power of 15 kW. The machine can work in a series of automatic and manual.


Radial arm workstation

Radial arm workstation


Radial arm workstation is designed for grinding and polishing discs made of natural stone and artificial. The machine is designed to work with two sectional head-driven belt drive of the main engine. Running head after polishing plate is done by hand using the arm, which is placed on the control panel.


Profiles cutting out machine

Profiles cutting out machine


The machine is designed for dust-free cutting of external and internal shapes of stone slabs (sides, tops, etc.) Cutting element is a rope diamond cutter with a diameter of 8-11 mm and a length of 3850 mm. Interior line with the holes must be disconnected.


Transverse cutting saw

Transverse cutting saw


Transverse cutting saw with a diameter of 350 mm from the feeder roller is a machine designed for cutting stone slabs at right angles to a specific dimension of a width of 750 mm. Process cuts shall be flush and with only one moving blade disk. It is used in the manufacture of floor panels, stairs, window sills and facades.


Splitting machine 200/30T

Splitting machine 200/30T


Splitting machine 200/30T was constructed for the purpose of stone processing waste generated in the production process. It can be to produce a piece of natural and artificial stones, with blocks of up to 200 mm.


Splitting machine 300/50T

Splitting machine 300/50T


Splitting machine 300/50T was constructed for the purpose of stone processing waste generated in the production process. It can be to produce a piece of natural and artificial stones, with blocks of up to 300 mm.